This Front Mounted Combination Lavatory/Toilet Fixture

is designed for medium and low security areas without

an accessible pipe chase. Fixtures are fabricated using

14-gauge type 304 stainless steel, seamlessly welded to

form a one piece, vandal-resistant unit. Internal piping is

stainless steel. Exposed surfaces are polished to a satin

finish, except for the integral seat which is polished to a

bright mirror finish.

STANDARD FEATURES

• Floor mounted cabinet, wall outlet waste.
• Oval lavatory basin with fast drain, air circulating self
draining soap dish and 4" (102mm) high backsplash.
• Slip joint 11/2" (38mm) P-trap sink waste with air vent.
• Plated steel concealed mounting bolts.
• Pre-piped and pressure tested internal valves and plumbing.
• Integral elongated seat.
• Self draining flushing rim.
• Blowout flushing action.
• 3" (76mm) OD toilet waste tube with 51/2" (140mm) dia. recessed gasket flange. Flange has two 3/8" (10mm) slotted holes on 6" (152mm) centers.
• Fully enclosed trap.
• Tamper resistant access panels

To receive a quote for this product, please complete the submittal linked below and either e-mail it to [email protected] or fax it to (800) 204-5630.

3618-90C